SSF-SFP-RJ45POE-1G 1 Gb SFP to 1xRJ45 Media Converter with PoE+
The SSF-SFP-RJ45POE-1G is a Gigabit Ethernet 10/100/1000Base-T to 100/1000Base-X non-managed stand-alone media converter. This converter offers PoE+ (30W PSE).
Additionally, the SSF-SFP-RJ45POE-1G is equipped with DIP switches for flexibility in configuration. Gigabit and Fast Ethernet operation is possible due to the SFP slot, which can accept all SFP types, including multimode, single mode, CWDM, DWDM, or BiDi. BiDi allows bi-directional transmission over a single strand of fiber.
DIP sw allows the setting of the fiber port speed, LFP function, or transparent or switching converter mode.
LED indicators signal the power status, UTP and FX port speed and link status of each port.
The converter also provides Auto-Negotiation & Auto MDI/MDI-X.
Once current stock is depleted, this unit will ship with an external AC power supply rather than embedded power.
- 10/100/1000Base-T to 100/1000Base-X SFP Converter
- DIP settings for fiber speed, LFP functions and PoE type
- Forward 2048 bytes (Max.) packets in switch mode
- Forward 9Kbytes Jumbo packets in transparent converter mode
- Auto-Negotiation & Auto MDI/MDI-X
- Supports Q in Q double tagged frame transparent
- Supports IEEE 802.1Q Tag VLAN pass thru
|SSF-SFP-RJ45POE-1G||Gigabit 10/100/1000Base-Tx to 100/1000Base-X SFP slot, DIP sw, with PoE+|
|Data Rate||1.25G (GE) or 155M (FE)|
|Duplex Mode||Full duplex|
|Fiber||MM 50/125µm, 62.5/125µm, SM 9/125µm|
|Distance||Depending on SFP used|
|Wavelength||Depending on SFP used, MM 1310nm, SM 1310, 1550nm, WDM 1310TX/1550Rx (Type A), WDM 1550TX/1310Rx (Type B)|
|Data Rate||10Mbps, 100Mbps, 1000Mbps|
|Duplex mode||Full duplex|
|Cable||100Base-TX Cat .5, 5e or higher, 1000Base-T Cat.5, 5e or higher|
|Operation & Details|
|Operating Temperature||0 ~ 50°C|
|Operating Humidity||10 ~ 90% non-condensing|
|Storage Temperature||-20 ~ 85°C|
|Dimensions||140 x 110 x 40mm (SFP transceiver and AC power cord not included)|
|Weight||Adapter : 90g, Converter : 120g|
|Standards & Power|
|Standards||IEEE 802.3, 802.3u, 802.3Z, 802.3ab|
|Indications||LED (Power, FX Link, SPD, TP Link)|
|Power Input||AC 100 ~ 240V, 47-63Hz, AC power cord included|
|PoE Specs||54VDC voltage output, short and overload protection, Pin polarity 1/2 (V+),3/6 (V-); IEEE 802.3at|
|Power Consumption||< 5W with no PSE, 35.4W at max load PoE+ (802.3at)|